Abus TVVR70020 Bedienungsanleitung

ABUS 16-channel NAS TVVR70020 User manual Version 1.0

Important safety information 10 Care and maintenance Maintenance is necessary if the device has been damaged. This includes damage to the plug, main

Introduction 11 IntroductionDear customers, Thank you for purchasing this product. This product complies with current domestic and European regu

System operation 12 System operationConnections on the rear of the device Note See the overview on page 4. No. Name Function 1 Network button: •

Setting up a connection 13 Setting up a connection Setting up the system Install and start the “IP Installer” on the enclosed s

Setting up a connection 14 Installing the plug-in When a camera is activated for the first time, you are requested to install the required plug-in

Live image 15 Live image Overview The live view starts automatically after the login. The screen header contains t

Live image 16 Operating mode A basic distinction is made between two categories: Symbol Meaning Live mode Playback mode The live mode is used fo

Live image 17 Using the numeric field The numeric field can be divided into three separate operating modes: • Camera selection • Presets • Rel

Live image 18 • 1Plus view Switching the image geometry The camera puck can be used to represent a total of 6 different views. The views ar

Live image 19 Favourites When using multiple cameras, it is advisable to save certain camera views as favourites. To display the cameras again,

Notes on the operating instructions 2 English These user manual contains important information for installation and operation. This should be also n

Playback 20 PlaybackOverview Click on the playback symbol to go to the playback mode. When switching to playback mode, the keyboard at the lower e

Playback 21 The slider for the start time specifies the absolute start time. If the start time is to be a certain date or time, the slider must be

Playback 22 Export You have the option to save a single frame or video data. Saving video data: Pos. Meaning 1 Switch to the playback mode 2 Sele

Configuration 23 Configuration Camera Click on “Settings” at the top left to go to the configuration menu. Select the Camera button. A completely

Configuration 24 Deleting an IP camera To delete a camera from the configuration, proceed as follows: Pos. Meaning 1 Select the camera to be delet

I/O module 25 I/O moduleI/O module Click on “I/O module” to go to the I/O module overview. The I/O module is divided into the following subsect

Drive 26 Drive Drive Click on “Drive” to go to the drive overview. The overview is divided into the following subsections: • RAID • USB-1 Cl

Drive 27 RAID Click on “RAID” to go to the settings. Here is an overview of the terms that are important for creating a RAID: Text Explanat

Drive 28 Procedure for setting up a RAID: Select the HDDs you want to use for the new array by activating the corresponding checkbox. Text Meanin

Actions 29 Actions Actions Click on “Actions” to go to the actions overview. The overview is divided into the following subsections: • Ove

Device overview 3 Device overview Status LED 1. HDD status LED 2. HDD activity LED 3. System status LED 4. Ethernet activity LED 5. One-t

Actions 30 Creating a schedule To create an individual schedule, proceed as follows: No. Symbol Meaning 1 Select a camera in the preview bar 2

Actions 31 Notifications Here you can set up up to 3 notifications for each camera. A notification can be triggered by: - Movement (IP MD)

Actions 32 Commands Here you can set up up to 3 commands for each camera. The following commands are available: - Go to preset - Start tour

Actions 33 Storage In the storage menu, you can enter settings for creating an archive and assign a storage drive to the camera. Archives are

Network 34 NetworkOverview Click on “Network” to go to the overview. The overview is divided into the following subsections: • LAN • E-mail •

Network 35 LAN You have to enter all the necessary parameters here for your device to function in the wireline network. The standard setting is DH

Network 36 Port Here you can enter settings for the ports. The standard setting for the HTTP port is port 80. The standard setting for the VMS

Security 37 SecuritySecurity Click on “Security” to go to the security overview. In the security settings, new users can be created, or the s

Security 38 User You have the option of creating up to 6 users here. The default user is eytron, which has supervisor permission. For security r

Other 39 OtherOther Click on “Other” to go to the overview for other features. The overview is divided into the following subsections: • Dat

Device overview 4 Overview 1. Network button: Switches device on/off 2. USB ports: USB port (e.g. for connecting an external HDD) 3. eSATA

Other 40 Firmware update Here you can update your firmware. Under www.abus-sc.com you can download the latest firmware for your product at any time

Troubleshooting 41 TroubleshootingBefore calling the Service department, read the following information to determine the possible cause of a malf

Device cleaning and care 42 Device cleaning and careNote • Your device requires no maintenance. Protect the device from dust, dirt and moisture Dis

Technical data 43 Technical data Subject to alterations and errors. 16-channel NAS TVVR70020 IP camera support ABUS Security - Center Channels (I

ABUS 16- channel NAS TVVR70020 Manufacturer: ABUS Security-Center GmbH & Co. KG Linker Kreuthweg 5 86444 Affing (Germa

Contents 5 Device overview ...

Contents 6 Configuration...

Quick guide 7 Quick guideBefore you start The following preparatory steps must be made: 1. Pay attention to the general information, safety infor

Important safety information 8 Important safety informationExplanation of symbols The following symbols are used in this manual and on the device: S

Important safety information 9 • To avoid the possibility of fires, the plug should always be disconnected from the network socket if the device is