Abus FU9075 Privest Wireless Key Switch Bedienungsanleitung PDF herunterladen (Seite 8)

3. Insert the key in the cylinder and turn it clockwise to its end

stop so that the red LED lights up. Keep the key in this

position.

4. After about 3 seconds, the red and green LED flash

alternately and the transmitter sends the learn message.

5. Check that the alarm system has recognised the detector.

6. Program no supervision for this detector.

7. Program the zone as “Latch KSW” zone type. If you

program the zone as “BlLatch KSW delay”, the system

starts the exit delay time following activation.

8. Switch the alarm centre back to normal operating mode.

Technical data

Dimensions (surface fitting) 85 x 114 x 42mm (WxHxD)

Protection type IP55

Weight 450g

Frequency 868.65 MHz

HF immunity 20V/m 80MHz–1GHz

Modulation AM

Supervision None

Battery 9V block

Battery lifetime Ca. 1 year

Ambient operating temperature -10°C – 50°C

The manufacturer reserves the right to make technical modifications

without prior notice.

CE declaration: www.security-center.org

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Keine Kommentare

Abus FU9075 Privest Wireless Key Switch Bedienungsanleitung Seite 8