
Secvest Video chapter
15|14
CASA10010
Description
2
4
Display LED display
Type of inputs Wireless inputs (868 MHz), network
Outputs 2 wireless outputs
Frequency 868 MHz
FM
RJ45 10/100 Mbit
DC voltage supply 12 V
70 mA
135 × 220 × 42 mm
Network cable
Description
Max. resolution @ frame rate 1280 x 720 @ 25 fps
1/4" progressive scan CMOS sensor
Focal length 3.45 mm
57.8°
MJPEG, MPEG-4, H.264
2 x 1-watt LEDs
5 m
RJ45, 10/100 MBit/802.11 b/g/n
34
12 V DC
420 mA
80 × 120 × 37 mm
Power supply unit • 1-meter network cable •
WLAN antenna • VMS Express Soware • wall/
ceiling bracket
TVIP41550
CASA10010
•HD 720p resolution: 1280 x 720 @ 25 fps
•Surveillance mode with video verication
•Motion detection via PIR sensor with RAS (real alarm selection)
•Integrated white light LEDs activated via motion detection
•An ideal addition to Secvest IP for combining video and alarm technology
•Virtual alarm inputs and outputs for communication via Secvest IP
•Integrated microSD card slot
•WLAN n standard
•The intelligent link between alarm and video surveillance
•Expands Secvest IP by 2 zones for up to 8 wireless detectors
•Compatible with Secvest 2WAY components (except wireless key switches and wire-
less control panel)
•Receives alarm messages via 868 MHz wireless or IP network (detector and video
recording equipment)
•Activates wireless sounder, wireless socket
•Activates and deactivates recording equipment through commands over the
network
•Compatible with VMS Basic/Professional/Enterprise and HDVR from VMS Version 7.0
•12 V power supply (PSU required)
Kommentare zu diesen Handbüchern